Model
|
SR100
|
Electric stirring motor
|
220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP
Rotation: 450 rpm max. (±8%)
Starting torque: 3.0 N.m
Rated toruqe: 1.54 N.m
Built-in gearbox ratio: 3:1 to 180:1
Controller: Delta, UL listed
|
| Pneumatic stirring motor |
- Power: 1/4 HP
- Rotation: 450 rpm max. (±8%)
- Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
- Working temperature: -10C to +70C
- For constant use: set rpm to 80% of maximum rpm
- Motor lubricant
- Daphne Eponex EP-No. 1
- Check/replenish/replace every 500 hours
- Air lubricant
- Type: JIS K2213-1 (ISOVG32)
- Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32
- Speed: 2-3 drops per minute
- For safety purpose, detach compressed air supply when not in use, left un-attended or at night
- Do not run motor un-loaded
- Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
- Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
- Make sure exhaust port/hole is clear from any debris or blockage
- Check every 2-3 days: Air Lubricant, Air Filter water drain
|
Port configuration
|
Lid: 6" triclamp
Center motor port: 3" triclamp
Drain port: 6" triclamp
Drain port on/off valve: 2" triclamp
Vacuum port: 1.5" triclamp
Condenser recirculating fluid port: 1/2" female NPT
Vessel jacket recirculating fluid ports: 1" female NPT
50L/100L collection tanks
* Standard lid: 6" tri-clamp, with 1.5" tri-clamp x 4
* Additional lid: 6" tri-clamp, with 1/2" FNPT with DipTube x 2, 1/2" FNPT x 1, 1/4" FNPT x 1, 2" tri-clamp x 1
* Top of tank: 1.5" tri-clamp with sight glass x 2
* Drain port: 1.5" tri-clamp
|
Main vessel
|
Volume: 100L
Material: 316L grade stainless steel
Interior finish: ElectroPolished
|
| Agitator |
Structure: propeller, 3-blade, dual-layer (standard)
Style: quick-change
Material: 316L grade stainless steel
Detachable length: 20 inches
|
| Center fluid jacket |
Volume: 22L
Material: 304 grade stainless steel |
| Outer insulation jacket |
Sealed
Material: 304 grade stainless steel |
| Collection tank |
Option 1: 10L x 2, 316L stainless steel, with manifold
Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly)
Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly)
|
Material
|
All wetted parts 316L grade stainless steel on main reactor body
Rest of reactor in 304 grade stainless steel
|
Main Condenser
|
Style: shell and tube heat exchanger
Number of tubes: 70
Condensing area: 0.89 m2
|
Pressure
|
Ultimate vacuum level: 1 Torr
Maximum positive pressure (C1D1 peer reviewed to 15 psi)
- Main vessel: 70 psi
-
Fluid jacket: 40 psi Temperature range
|
|
-55°C to +250°C (-67°F to +482°F)
|
|
Temperature sensor/display
|
Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp
Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp |
|
Sealing gasket
|
Food grade Viton |
| Main Mounting Frame |
Heavy duty 2 x 2" 304 grade stainless steel, mounted on four casters |
| Drain port ground clearance |
Drain port: 19.5 inches
Drain valve: 14 inches |
Unit/shipping weight
|
255 Lbs / 350 Lbs
|
| Unit/shipping dimensions |
38 x 32 x 82" (WxDxH) |
| Compliance |
ETL tested to UL and CSA standards
C1D1 peer review by PSI (optional) |
