Dual-Jacketed 100L 316L Stainless Steel Reactor

Features

Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber

All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
Shell and tube heat exchanger with 70 tubes for the best condensing results
ElectroPolished internal chamber
Detachable condenser and collection tanks
Dual collection tanks with big sight glass allows you to drain without breaking vacuum
High drain port clearance for easy draining or added filtration
Large ports (top 12" bottom 6") allows easy chamber cleaning
Top placed vacuum port on condenser provides better flow and condensing results
No messy cable, with space saving integrated stirring motor controller
Heavy-duty stainless-steel frame with swivel casters
Built-in flashlight gives you a clear view inside the chamber
Positive/negative pressure gauge
Matte finish stainless steel
Customizable lid for various application
Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT
Choice of bolted or pin clamp for various pressure applications
Flexible bellow condenser connection reduces shipping damage
Electric motor and controller model is ETL certified to UL and CSA standards
Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.

SPECIFICATIONS

Model	SR100
Electric stirring motor	220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP Rotation: 450 rpm max. (±8%) Starting torque: 3.0 N.m Rated toruqe: 1.54 N.m Built-in gearbox ratio: 3:1 to 180:1 Controller: Delta, UL listed
Pneumatic stirring motor	- Power: 1/4 HP - Rotation: 450 rpm max. (±8%) - Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa) - Working temperature: -10C to +70C - For constant use: set rpm to 80% of maximum rpm - Motor lubricant Daphne Eponex EP-No. 1 Check/replenish/replace every 500 hours - Air lubricant Type: JIS K2213-1 (ISOVG32) Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32 Speed: 2-3 drops per minute - For safety purpose, detach compressed air supply when not in use, left un-attended or at night - Do not run motor un-loaded - Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM - Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action. - Make sure exhaust port/hole is clear from any debris or blockage - Check every 2-3 days: Air Lubricant, Air Filter water drain
Port configuration	Lid: 6" triclamp Center motor port: 3" triclamp Drain port: 6" triclamp Drain port on/off valve: 2" triclamp Vacuum port: 1.5" triclamp Condenser recirculating fluid port: 1/2" female NPT Vessel jacket recirculating fluid ports: 1" female NPT 50L/100L collection tanks * Standard lid: 6" tri-clamp, with 1.5" tri-clamp x 4 * Additional lid: 6" tri-clamp, with 1/2" FNPT with DipTube x 2, 1/2" FNPT x 1, 1/4" FNPT x 1, 2" tri-clamp x 1 * Top of tank: 1.5" tri-clamp with sight glass x 2 * Drain port: 1.5" tri-clamp
Main vessel	Volume: 100L Material: 316L grade stainless steel Interior finish: ElectroPolished
Agitator	Structure: propeller, 3-blade, dual-layer (standard) Style: quick-change Material: 316L grade stainless steel Detachable length: 20 inches
Center fluid jacket	Volume: 22L Material: 304 grade stainless steel
Outer insulation jacket	Sealed Material: 304 grade stainless steel
Collection tank	Option 1: 10L x 2, 316L stainless steel, with manifold Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly) Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly)
Material	All wetted parts 316L grade stainless steel on main reactor body Rest of reactor in 304 grade stainless steel
Main Condenser	Style: shell and tube heat exchanger Number of tubes: 70 Condensing area: 0.89 m2
Pressure	Ultimate vacuum level: 1 Torr Maximum positive pressure (C1D1 peer reviewed to 15 psi) Main vessel: 70 psi Fluid jacket: 40 psi Temperature range
	-55°C to +250°C (-67°F to +482°F)
Temperature sensor/display	Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp
Sealing gasket	Food grade Viton
Main Mounting Frame	Heavy duty 2 x 2" 304 grade stainless steel, mounted on four casters
Drain port ground clearance	Drain port: 19.5 inches Drain valve: 14 inches
Unit/shipping weight	255 Lbs / 350 Lbs
Unit/shipping dimensions	38 x 32 x 82" (WxDxH)
Compliance	ETL tested to UL and CSA standards C1D1 peer review by PSI (optional)

Your cart is empty

Your cart

Estimated total

Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor

Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor

Country/region