400mm (15.7 inches) Buchner Type Filter Trolley Model BABF400

$6,950.00  (Continental US Shipping Included)

If we are sold out, please call or email to reserve your unit for next shipment.

This is a complete filtering funnel similar in application to a laboratory Buchner Funnel, mounted on a trolley.  You can filter solids, waxes, carbon, clay, etc... with these filters.  Filter in minutes what you would normally do in hours.

Laboratory Size.  Holds 1 liter of crude per batch, 2.8 gallons of 10:1 Solvent:Crude, 2+ liters of lipids (@50% lipids content).

This is a Polypropylene molded plastic filter trolley.  This machine is tough, durable and almost indestructible (it's basically one solid piece of plastic).  We have one unit that is 10 years old and works like new.  PP is impervious to Nitric, Hydrochloric and similar acids so it will easily handle Ethanol, Isopropyl and any solvent you can throw at it. 

This machine comes with an included diaphragm pump which does the job of sucking the filtrate through the filter, so NO VACUUM PUMP REQUIRED.  The pump can handle acids, bases and alcohols so it needs no special care. NO COLD TRAP REQUIRED.  This is a pneumatic pump so there is no risk of sparks, this means you must have an air compressor to supply this machine with compressed air.

We place filter paper over a removable grate, we then place a seal around the filter paper to prevent leaks.  There is no chance of leaks.  This takes a few minutes to install and even faster to take apart.  Add your tincture and begin filtering.

This machine completely dissembles so is easy to clean. 

It comes mounted on casters, so it is easily movable.

OD Diameter: 400mm (15.7 inches)
ID Diameter: 380mm
Height Minimum: 400mm
Dimensions L W H: 720mm x 500mm x 442mm
Material: PP
Material Thickness: 15mm
Compressed Air Pressure: From 4 to 8 bar
Absolute Pressure Minimum: 0.2 bar
Compressed Air Pressure Consumption: From 150 to 420 l/min (14.8 CFM)
Recommended Compressor: 5HP 17.9 CFM at 100 PSI
Capacity: About 9 Gallons Total
Weight: 52 Lbs.
Made in Italy


  • FDA Food Grade Materials
  • Will not crack under extreme cold
  • Safe to use with almost all organic solvents, except Pentane.
  • Filter grate will not warp over time
  • High R Value (Insulating Materials)
  • Huge filtering capacity
  • No Vacuum Pump required
  • No Cold Trap required
  • Explosion Proof.  No source of sparks. No explosion risk.
  • No ASME Certification Required
  • Easy to clean and disassemble
  • Cheap filter paper
  • Leak proof filter paper installation with reusable gasket
  • Filter out carbon, clay, wax, etc...
  • Lid helps minimize evaporation
  • Properly balanced, won't flip over
  • Easy to move, mounted on casters

We are an official authorized distributor for all the Americas for this product.  These are custom modified for our industry.

These are custom made units with delivery times of approximately 60 days. 

Box dimensions, 60x80x75cm, Gross Weight 30 Kg.